HTM-60W-12V LED Driver Dimmable Constant Voltage
Transformer
The actual transformer is encapsulated in the enclosure.
Input leads are 20 AWG output leads are 16 AWG.
Lead insulation is 105°C.
The transformer uses a class B 130°C insulation system.
Enclosure
Enclosure temperature does not exceed 70°C @ 40°C ambient.
Wiring compartment has 2 knockouts sized For 3/4 inch screw cable connectors.
The removable cover for the wiring compartment is secured in place by screw.
The enclosure is black powder coated.
General
The transformer has a manual reset thermal circuit breaker on the secondary side.
The transformer can be controlled with a low-voltage dimmer.
The transformer is ETL listed.
Specifications
Max Load: 60W
Weight: 4 lbs.
Input Voltage: 120V 60Hz
Output Voltage Full Load: 11.5VDC
Input Current Full Load: 540mA
Open Circuit Volts: 12.5VDC
Output Current Full Load: 4.8A
Efficiency: 89.20%
Coil Former: Double section Bobbin
Thermal Class: B 130C
Leads Primary: PVC 600V 20#
Leads Secondary: PVC 300V 14#
Dimensions: Lenght:6.06", Width: 2.59", Depth: 2.2"