HT-1206T 60W 12V LED Driver Waterproof IP67 Constant Voltage
Non-dimmable

UL Approved Product, Non-dimmable

PART NUMBER: HT-1206T

INPUT FEATURES:

RATED INPUT VOLTAGE: 100Vac to 240Vac
RATED INPUT FREQUENCY: 50Hz/60Hz
INPUT CURRENT: 1.4A max. & 100Vac.
INRUSH CURRENT: 30A max. at 100-240Vac input for a cold start at 77F.
EFFICIENCY: higher than 82% at 100-240Vac input and output full load (5.0A).

OUTPUT FEATURES:

RATED OUTPUT WATTAGE: 60 WATTS
RATED OUTPUT VOLTAGE: 12.0VDC
RATED OUTPUT CURRENT: 0.0A-5.0A
SHORT-CIRCUIT OUTPUT POWER: HICCUP MODE (HICCUP(3W))
LINE REGULATION: ≤1%
LOAD REGULATION: ≤5%

PROTECTIONS:

OVER - CURRENT PROTECTION: The power supply shall be hiccupped and no damage shall occur when output current reaches to its over-current protection trigger point (set@ Max load 120-300% ). The power supply shall be self - recovery when the fault condition is removed.
SHORT - CIRCUIT PROTECTION: The power supply shall be hiccupped(input power less than 3W) and no damage shall occur when any output operating in a short circuit condition under any line condition for an indefinite period of time. The power supply shall be self - recovery when the fault condition is removed.
OVER - VOLTAGE PROTECTION: The power supply shall be hiccupped and no damage shall occur when output current reaches to its over- voltage protection trigger point (set@ Max output voltage 120-180% ). The power supply shall be self - voltage when the fault condition is removed.
ENVIRONMENTAL OPERATING CONDITIONS: The power supply shall be capable of operating continuously in any mode without performance deterioration in the following environmental conditions.
Ambient Temperature: 32F ～ 104F
Relative Humidity: 10% ～ 90%
NON-OPERATING: The power supply shall be capable of withstanding the following environmental conditions extended periods of time, without sustaining electrical or mechanical damage and subsequent operational deficiencies.
Ambient Temperature: -22F ～ 158F
Relative Humidity: 10% ～ 90%